How Much Does 200 Linear Feet of Privacy Fence Cost

If you’re planning to enclose a yard, the first question is usually the price. Contractors quote fences per linear foot, which makes budgeting easy once you know the right rate. This guide covers what 200 feet of privacy fence costs, what drives the price up or down, and how to avoid surprises.

The Short Answer

The formula is simple: total cost = fence length × price per foot.

For 200 feet, that comes to about $6,300 to $10,700. homegnome

In pricier markets, a Pacific Northwest installer gives a planning range of about $40 to $90 per linear foot for premium cedar, custom gates, or difficult terrain. At 200 feet, that’s $8,000 to $18,000. coolcatfence

Treat all of these as planning numbers. The installer above says its own figures are not a final quote.

Cost by Location

Labor and material prices vary by region. The same national guide lists installed rates for a sample of cities, and the 200-foot totals below are my own calculations from them:

• Houston: $30.10 to $49.80 per foot, or about $6,000 to $9,960 homegnome
• New York: $34.50 to $61.40 per foot, or about $6,900 to $12,280 homegnome
• Seattle: $33.30 to $58.40 per foot, or about $6,660 to $11,680 homegnome

Those rates assume a 6-foot fence on relatively level, easy-to-dig terrain.

What 200 Feet Actually Requires

With 8-foot post spacing and a 6-foot wood privacy fence, a 200-foot run needs roughly:

• 25 sections and 26 posts, plus one extra post per gate
• 75 rails, at three per section
• About 420 pickets at 5.5 inches wide with a quarter-inch gap, or around 450 with an 8 percent waste allowance
• Concrete, screws or nails, and gate hardware

If you’re buying materials yourself, order these quantities, since running short usually means a second trip and possibly mismatched lumber.

What Moves the Price

Material. Pressure-treated pine is usually the cheapest upfront.

Height and style. A taller fence uses more material and longer posts. Decorative styles like horizontal slats or shadowbox add materials and labor hours.

Terrain. Slopes, rock, tree roots, and poor access all slow the crew down.

Site work and extras. Removing an old fence, clearing brush, grading, delivery fees, and permits can all add to the total.

Sample Budgets for 200 Feet

• DIY with pressure-treated wood: about $3,000 to $6,000 in materials, plus rented or bought tools
• Professional install, standard 6-foot fence: about $6,300 to $10,700
• Premium materials or high-cost region: about $8,000 to $18,000

Ways to Save

• Get several quotes. Three or more written, itemized quotes show you what’s normal in your area.
• Stick to standard sizes.
• Choose wood and seal it yourself. Pressure-treated pine with a sealant is the budget route.
• Do the prep. Clearing the fence line and removing old fencing yourself can trim labor charges.
• Book off-season. Contractors are often less busy in late fall or winter and may negotiate.

FAQs

How much does 200 linear feet of privacy fence cost?
Most US homeowners should budget about $6,300 to $10,700 installed. Basic wood can come in lower, and premium materials or expensive regions push it higher.

Is DIY much cheaper?
Yes, materials alone run about $3,000 to $6,000.

Which material is cheapest?
Pressure-treated wood is usually the lowest upfront cost.

Are gates included in the per-foot price?
Often not.

Do I need a permit?
It depends on your city or HOA. Many places limit fence height, and some require permits above a certain height.

How long does installation take?

Regions, materials, and survey methods differ

Should I use a calculator or a quote?
Use a calculator to estimate materials and a contractor’s quote for the actual price. A site visit catches problems a formula can’t.

Bottom Line

For 200 linear feet, plan on about $6,300 to $10,700 professionally installed, or $3,000 to $6,000 in materials if you build it yourself. Measure carefully, count your gates, confirm local rules, and compare itemized quotes so you’re judging like with like.